Helmet Guides

Lane Splitting vs Lane Filtering: Which States Allow It in 2026?

Rider in a white full-face helmet on a sport bike riding in the lane of a multi-lane road

About this guide: This article is general motorcycle helmet advice from the CYRIL Helmets team. Any helmet problems it mentions are common to helmets of all brands and are not reports of defects or complaints about a specific CYRIL model. All current CYRIL helmets are certified to U.S. DOT FMVSS No. 218. For help with your own CYRIL helmet, contact our customer service team.

As of November 2026, California is the only state that allows lane splitting, which means riding between lanes of moving traffic. Five more states allow lane filtering or a limited version of it, each with its own speed limits: Arizona, Utah, Montana, Colorado and Minnesota. In every other state there is no law that permits riding between lanes, so assume it is not allowed. The rules are narrow, they differ from state to state, and two of them have built-in expiry dates, so check the details below before you try it on a trip.

Lane splitting vs lane filtering

The two terms get mixed up all the time, and the difference matters because most states that allow one do not allow the other.

  • Lane splitting is riding between rows of vehicles that are moving. California's Vehicle Code defines it as riding a two-wheeled motorcycle "between rows of stopped or moving vehicles in the same lane."
  • Lane filtering is moving slowly between or past vehicles that are stopped, usually at a red light or in gridlock, to get to the front of the queue.

Colorado's Department of Transportation puts it simply: filtering lets riders get through stopped traffic, while splitting, riding between lanes of moving vehicles, is still illegal there.

Rider in a white full-face helmet on an adventure motorcycle riding along a guardrail

The rules in each state

State What is allowed Key limits
California Lane splitting Defined in law since 2017; no speed limit written into the statute. The CHP may publish safety guidelines.
Arizona Filtering past stopped vehicles Road with at least two lanes in your direction and a speed limit of 45 mph or less; rider at 15 mph or less
Utah Filtering past stopped vehicles At least two lanes in your direction, speed limit of 45 mph or less, not on an on-ramp; rider at 15 mph or less
Montana Filtering past stopped or slow vehicles Traffic stopped or at 10 mph or less; rider at 20 mph or less; lanes wide enough to pass safely
Colorado Filtering past stopped vehicles, on the left Traffic fully stopped; rider at 15 mph or less; no shoulder riding, no crossing the center line; law set to repeal Sept. 1, 2027
Minnesota Filtering and limited splitting Rider at 25 mph or less and no more than 15 mph faster than traffic; not in roundabouts, school zones, single-lane work zones or queued on-ramps

A few details that are easy to miss:

  • "Stopped" means stopped. Colorado's DOT says traffic that is slowing down or crawling in congestion does not count. Arizona, Utah and Colorado only allow filtering past vehicles that are not moving.
  • Two wheels only. Arizona, Montana, Colorado and California's definition all refer to two-wheeled motorcycles. Trikes and sidecar rigs are not covered.
  • Laws can expire. Colorado's filtering law repeals on September 1, 2027 unless lawmakers extend it, and Utah's filtering provision is going through a legislative sunset review in 2026. Check the current status before relying on either.
  • Minnesota is the most permissive after California. Its 25 mph cap applies to the motorcycle, so filtering in slow-moving traffic is allowed as long as you stay under both limits.

How to filter safely where it is legal

Being legal does not make it safe in every gap. Riders who filter regularly tend to follow a few habits:

  1. Go slow. Stay well under the legal maximum. At 10 mph you can stop in a few feet if a door opens or a car edges over.
  2. Pick the gap between the two leftmost lanes where possible. Drivers expect traffic on their left, and it is the only gap Colorado allows.
  3. Watch the front wheels and the drivers' heads. A car about to change lanes usually turns its wheels or the driver checks the mirror first.
  4. Be careful around large vehicles. Trucks and buses have big blind spots and wide mirrors. Wait behind them instead of squeezing past.
  5. Stop filtering when traffic starts moving. Colorado's law says you must rejoin the flow when the stopped vehicles start moving, and that is good practice everywhere.
  6. Cover the brakes and keep your fingers off the horn unless you really need it. Startling a driver does not help.

Side view of a rider in a white full-face helmet on a naked bike in traffic lane

Being seen matters more between lanes

When you filter, you are in a place most drivers are not looking. Bright gear and a visible helmet help. A light-colored or high-contrast helmet is easier to spot in a mirror than a dark one, and our guide on whether helmet color matters covers what the research says. A clear or lightly tinted visor also helps you see brake lights and turn signals in the shade under trucks and overpasses.

Your helmet should also let you turn your head easily. Filtering means constant head checks, and a helmet that lifts or presses when you look over your shoulder will wear you out in stop-and-go traffic.

Rider in a matte open-face helmet and face mask riding a cruiser beside a concrete wall

Riding through states with different rules

On a road trip you can cross from a state where filtering is legal into one where it is not without noticing. A rider heading from Arizona into New Mexico, or from Minnesota into Wisconsin, needs to stop filtering at the border. Helmet laws change at state lines too, so our helmet laws by state guide is worth a look before a long ride. If you ride in a group, agree before you leave whether anyone will filter, and use hand signals so the group stays together. Our guide to staggered formation covers how groups should ride in traffic.

FAQ

Is lane splitting legal in California?

Yes. California defines lane splitting in Vehicle Code section 21658.1 and is the only state that allows riding between lanes of moving traffic. The law does not set a speed limit, so riders are expected to ride safely for the conditions.

What is the difference between lane splitting and lane filtering?

Lane splitting means riding between lanes of moving traffic. Lane filtering means riding slowly between or past vehicles that are stopped, such as at a red light.

Which states allow lane filtering?

Arizona, Utah, Montana, Colorado and Minnesota have laws that allow lane filtering under set conditions. California also allows it as part of its lane splitting law.

How fast can you go when lane filtering?

It depends on the state: 15 mph in Arizona, Utah and Colorado, 20 mph in Montana, and 25 mph in Minnesota, where you also cannot go more than 15 mph faster than traffic.

Can you lane filter on the freeway?

Not in Arizona or Utah, where filtering is only allowed on roads with a speed limit of 45 mph or less. Minnesota excludes queued on-ramps. California allows lane splitting on all roads, including freeways.

Is lane filtering legal in Texas or Florida?

No. As of November 2026 neither state has a law allowing it. Bills have been introduced in several states, so check your state's current traffic code.

Sources