What Is Countersteering? How to Turn a Motorcycle at Speed
About this guide: This article is general motorcycle helmet advice from the CYRIL Helmets team. Any helmet problems it mentions are common to helmets of all brands and are not reports of defects or complaints about a specific CYRIL model. All current CYRIL helmets are certified to U.S. DOT FMVSS No. 218. For help with your own CYRIL helmet, contact our customer service team.
Countersteering is how every motorcycle turns once it is moving faster than a walking pace: to go right, you press forward on the right handgrip, and to go left, you press the left one. The press briefly steers the front wheel the "wrong" way, which makes the bike lean into the turn, and the lean is what turns it. Oregon's official motorcycle manual puts it in one line: "To turn, the motorcycle must lean," and to lean, you press "on the handgrip in the direction of the turn." Every rider does this already, often without knowing it. Doing it on purpose is what lets you turn quickly and precisely when you need to.

Why pressing right makes you go right
It feels backwards, so it helps to see what happens step by step:
- You push forward on the right grip. The front wheel turns slightly to the left for a moment.
- The tires steer out from under the bike, so the motorcycle starts to lean to the right.
- Once it leans, the bike follows a curve to the right. The front wheel settles into pointing a little into the turn, and you hold a light, steady pressure to keep the lean.
- To straighten up, you ease the press or press the other grip, and the bike stands back up.
You do not need to steer hard. On a normal road curve, the press is a small, smooth push, not a shove. The harder or quicker you press, the faster the bike leans. Oregon's manual adds that "the higher the speed or the sharper the turn, the greater the lean angle."
Slow, look, press, roll
State rider manuals teach turning as four steps, in this order. They work for every curve, from a freeway ramp to a mountain hairpin.
| Step | What you do | Common mistake |
|---|---|---|
| Slow | Reduce speed before the curve, with throttle and both brakes if needed | Braking hard in the middle of the curve |
| Look | Turn your head and look through the turn to where you want to go | Staring at the edge line or the guardrail |
| Press | Press the grip on the side you want to turn toward | Pulling on the bars or leaning your body without pressing |
| Roll | Roll on the throttle gently to hold a steady speed through the curve | Chopping the throttle closed halfway through |
The Look step is the one most new riders skip. Oregon's manual says to keep your eyes level with the horizon and turn just your head, not your shoulders. The bike tends to go where your eyes go, so if you look at the ditch, you are likely to drift toward it. This is also where your helmet matters: a helmet that fits well lets you turn your head freely and keeps the visor's view wide. If yours lifts or shifts when you look sideways at speed, read our guide on why a helmet lifts at highway speed.

When countersteering saves you
Countersteering is not just for curves. It is the fastest way to move the bike sideways, which is how you swerve around a pothole, a piece of tire tread or a car door. Say you are riding at 35 mph and a car pulls halfway out of a driveway on your right. A firm press on the left grip, then a press on the right grip to straighten, moves the bike left in a fraction of a second. Trying to turn the handlebars toward the open space, the way you would in a parking lot, does the opposite at that speed and leans you toward the car.
Two rules make swerving work: swerve or brake, but do not do both at the same time, and keep your eyes on the escape path, not on the obstacle.
How to practice it
Find an empty parking lot or a quiet straight road with no traffic. Do your T-CLOCS pre-ride check first.
- Ride in a straight line at about 20 to 25 mph.
- Give the right grip a light forward press with your palm. Feel the bike lean right and start to turn.
- Release and let it straighten. Repeat on the left.
- Make the press a little firmer each time, so you feel how quickly the bike responds.
- Practice gentle weaves: press right, then left, then right, keeping a steady throttle.
Keep your arms relaxed and your grip light. Stiff arms fight the bike and make it feel heavy. If you want structured practice, a rider training course covers swerving and cornering drills with a coach. Our guide to the gear you need for a rider course lists what to bring.

Slow tight turns are different
At walking pace, in a parking lot or a U-turn, the bike behaves differently. Here you turn the handlebars in the direction you want to go, and Oregon's manual says to counterbalance: lean the motorcycle into the turn but keep your body upright. Countersteering takes over once you are moving fast enough that the bike balances on its own, typically as you leave the parking lot and pick up speed.
Braking in a curve
The safest plan is to finish braking before the curve. If you have to slow down mid-curve, Oregon's manual says to apply smooth, gradual pressure to both brakes as you start reducing your lean angle, then add brake pressure as the bike straightens up. A sudden, hard squeeze while leaned over can make the tires skid.
If you are heading to a track day to work on cornering, our first track day guide covers the gear and what to expect. For riding curves with friends, read up on group riding formation, which goes single file through curves.
FAQ
What is countersteering in simple terms?
Pressing forward on the handgrip on the side you want to turn. Press right to go right, press left to go left. The press makes the bike lean, and the lean makes it turn.
At what speed does countersteering start?
Once the bike is moving faster than a slow walking pace and balancing on its own. At very low speeds, such as U-turns in a parking lot, you steer the bars directly into the turn instead.
Do you countersteer on every turn?
Yes, at normal road speeds. Most riders do it without thinking. Learning to do it on purpose makes your turns smoother and your emergency swerves faster.
Should I lean my body or press the bars?
Press the bars. In normal turns, the rider and the bike lean together at the same angle. Leaning your body without pressing the grip makes the bike turn slowly and imprecisely.
Is countersteering the same as push steering?
Yes. Push steering, press steering and countersteering all describe pressing the grip on the side you want to turn toward.
Can you brake while countersteering?
Avoid it during a swerve: swerve first, then brake once the bike is upright. In a curve, brake gently while reducing your lean, and add pressure as the bike straightens.
Sources
- Oregon DMV Motorcycle and Moped Manual, Section 4: turning with slow, look, press and roll, normal and slow tight turns, and braking in a curve.
- Motorcycle Safety Foundation: rider training courses that include cornering and swerving.
- NHTSA motorcycle safety: general riding safety information.