Retro Motorcycle Helmets: A Style Guide for Café Racers, Bobbers and Scramblers
About this guide: This article is general motorcycle helmet advice from the CYRIL Helmets team. Any helmet problems it mentions are common to helmets of all brands and are not reports of defects or complaints about a specific CYRIL model. All current CYRIL helmets are certified to U.S. DOT FMVSS No. 218. For help with your own CYRIL helmet, contact our customer service team.
A retro motorcycle helmet is a modern, certified helmet styled after the 1960s and 70s: a rounded shell, leather or stitched trim, and simple paint or classic graphics. The most popular shape is the open-face (3/4) helmet with goggles or a short shield. Retro full-face helmets with a round chin bar give the same look with more coverage. Choose the shape for how you ride, then the finish for your bike. Whatever the style, it must carry a real DOT FMVSS No. 218 label.

The main retro helmet shapes
| Shape | Look | Good for |
|---|---|---|
| Open-face (3/4) | Classic café and cruiser look, ears covered | City riding, short trips, warm weather |
| Open-face with shield | Retro shell with a built-in clear or tinted visor | Daily commuting without goggles |
| Retro full-face | Round shell, wide eye port, vintage chin bar | Highway, longer rides, cooler weather |
Half helmets also have a vintage look but cover far less. Our comparison of 3/4 vs half helmets shows what you give up.
Eye protection: goggles, peaks and bubble shields
- Goggles are the classic choice with an open-face helmet. Look for impact-rated lenses and a strap that sits flat on the back of the shell.
- Snap-on peaks block low sun and add to the vintage look. Most retro open-face helmets have three snaps above the eye port.
- Bubble shields snap on the same way and give more wind protection than goggles.
- Built-in visors are the most practical for daily riding. You flip them down at speed and up at a stop.
If your eyes water on an open-face helmet, read why your eyes water when you ride open-face.

Finishes and graphics
- Gloss cream or off-white: the most classic vintage color, and easy for drivers to see.
- Matte black: the bobber and custom look. Simple and modern.
- Pinstripes and leather-look trim: café racer details that suit chrome and spoked wheels.
- Racing numbers, stripes and checkers: a nod to old-school racing, great on scramblers and café bikes.
- Bold art graphics: waves, teeth and hand-drawn designs for riders who want the helmet to be the statement.
Lighter colors are easier to see in traffic. More on that in does helmet color matter.

Matching the helmet to your bike
- Café racer: open-face or retro full-face, gloss finish, stripes or numbers, goggles or a bubble shield.
- Bobber and custom cruiser: matte black or dark colors, minimal graphics, leather trim.
- Scrambler: open-face with a peak and goggles, earthy colors, or a retro full-face for dirt and gravel.
- Vintage scooter: cream, pastel or two-tone open-face with a short shield.
A simple rule: pick one strong element, such as a color, a graphic or a trim, and keep the rest of your gear quiet.

Retro look, modern safety
Some vintage-style helmets sold online are thin "novelty" shells that only look the part. Before you buy, check for:
- A DOT FMVSS No. 218 label on the back and a manufacturer label inside.
- A thick, firm EPS foam liner under the comfort padding.
- A real chin strap with D-rings or a sturdy buckle.
- A snug fit that does not rock forward or back.
See whether a cool-looking helmet can fail you in a crash for the full checklist.
Getting the fit right
Retro shells are often rounder than modern sport helmets, and open-face helmets have less padding around the jaw to hold them in place. That makes fit even more important. Measure your head at the widest point, just above the eyebrows, and use the brand's size chart. The helmet should feel snug all round, with even pressure on the forehead and cheeks, and should not slide forward over your eyes when you shake your head. If you sit between two sizes, read what to do between helmet sizes.
Caring for a retro helmet
- Wipe leather-look trim with a damp cloth only; no solvents.
- Clean gloss paint with mild soap and water, and never polish a matte finish.
- Store goggles separately so the lenses do not scratch the shell.
FAQ
Are retro motorcycle helmets safe?
A retro helmet with a genuine DOT label is built to the same standard as any other DOT helmet. A full-face retro helmet covers more than an open-face one.
What helmet goes with a café racer?
A gloss open-face or retro full-face helmet with stripes, numbers or pinstripes, worn with goggles or a bubble shield.
Can I wear goggles with any open-face helmet?
Most, yes. Check that the goggles fit the eye port without pressing on your nose and that the strap stays put on the shell.